DESERT® & TROPIC® Turnkey Production
Mono-Crystalline or Poly-Crystalline: Which Module Is Better?
Mono-crystalline or poly-crystalline - which module type is better? This question, in fact, can’t be answered since it depends on the area of application.
The difference lies in the crystal structure: poly-crystalline cells consist of wafers that do not have the same orientation all over the crystals. They are produced, for example, using molding techniques.
With an efficiency of up to 27%, mono-crystalline solar cells are the most effective solar cells with direct sunlight. They are highly suitable when only limited roof surface area is available or when very high power is needed. However, mono-crystalline modules are comparatively expensive on account of their sophisticated production techniques. And their performance deteriorates with diffuse light. This is a disadvantage particularly in case of roof surface areas that are not directly facing the south.
By contrast, poly-crystalline modules don’t have such a high level of efficiency, but they are considerably cheaper. This is why they are also the most frequently installed modules at present. They crystal structure is characteristic; it allows the poly-crystalline solar modules to reflect strongly in sunlight.
Our turnkey production is flexible in terms of type and size. It’s also highly flexible in terms of panel size.
If you need more information, please contact us.